ASMoto Power Distribution Module Kit for Racing Purpose (PowerModule + Membranepanel + WSM)

Freely programmable power splitter kit contain:1 x ASMoto PowerModule1 x ASMoto MembranPanel1 x ASMoto WSMWith the PowerModule, the fuse and relay board can be replaced, significantly reducing the wiring harness of the race car. With 18 high-current and 8 low-current outputs, many loads can be safely powered. Wiring is quicker and easier, and the finished bundle is smaller and more transparent. Later modifications to certain functions can be easily made from software.With its two accessories, the ASMoto PowerModule is unique on the market:The WSM module is wirelessly connected to the PowerModule. It can be used to replace the steering column's bayonet switches and their wires. A wide range of functions can be programmed into the 8 push buttons, such as turn signal, lights, wiper wash, ALS, start program.The 11 or 14 buttons on the MembranePanel can also be freely programmed for any function, with separate LEDs indicating status and errors. All this requires a total of 4 wires to the PowerModule. We supply a choice of 70 symbols in the layout requested by the customer.MembranePanel iconsThe PowerModule is compatible with any other ECU that can communicate on CAN bus, e.g. MoTeC, DTA, Syvecs, thanks to the 2 CAN bus. It can be used to start the fuel pump, the engine cooling, among many other things, without relays and extra wires.Support for electronic disconnectors, such as Cartec Battery Isolators.More information about the product hereImportant Note: Professional installation is required, and the ASMoto USB-CAN Interface is necessary for programming!